| 191.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Size (mm):82.55x130.175x61.9; d:82,55 mm; Bearing number:32SF52; Width (mm):61,9; B1:72,24 mm; Bore Diameter (mm):82,55; D:130,175 mm; Outer Diameter (mm):130,175; d1:118,74 mm; C:61,9 mm; |
| 191.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings | d:95 mm; Bore Diameter (mm):95; C:55,58 mm; Angle (α):30 °; Basic dynamic load rating (C):244 kN; B:55,58 mm; Size (mm):95x170x55.58; Weight:5,498 Kg; Outer Diameter (mm):170; Bearing number:5219G; Width (mm):55,58; D:170 mm; |
| 12.50.2559.201.49.1502 Standard 5 Slewing Ring Bearings | D:25 mm; Width (mm):20; Db:17,6 mm; Bearing number:RNAFW172520; r min.:0,3 mm; Da max.:23 mm; Outer Diameter (mm):25; Basic static load rating (C0):17,9 kN; d:17 mm; db:20,6 mm; Weight:0,033 Kg; Size (mm):17x25x20; Bore Diameter (mm):17; C:20 mm; Basic dynamic load rating (C):12,4 kN; |
| 121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings | Size (mm):10x26x8; Basic dynamic load rating (C):3,75 kN; B:8 mm; ra max.:0,3 mm; C:8 mm; d:10 mm; Weight:0,015 Kg; (Grease) Lubrication Speed:48 000 r/min; Bore Diameter (mm):10; Basic static load rating (C0):1,45 kN; da min.:12,5 mm; r min.:0,3 mm; a:6,5 mm; Da max.:23,5 mm; D:26 mm; r1 min.:0,15 mm; Bearing number:BNT000; (Oil) Lubrication Speed:64 000 r/min; Outer Diameter (mm):26; Width (mm):8; |
| 11.50.3347.001.49.1502 Standard 5 Slewing Ring Bearings | Relubrication Hole Location (oh):7.5000; Snap Rinf Location (Sd):3.2000; Snap Ring Thickness (I):2.4000; Bore Dia (d):49.2100; Outer Dia (D):90.0000; Static Load Rating (Cor):23,232; Bearing Type:Inch Size Bore Diame; Shaft Size (ds) - 1-15/16:115/16; Bore Diameter (mm):49,21; Inner Width (Bi):51.6000; Bearing Inner Race Width - Extended Side (m):32.6000; Dynamic Load Rating (Cr):35,095; Snap Ring Dia. (G):96.3000; |
| 11.50.3747.001.49.1502 Standard 5 Slewing Ring Bearings | Shaft Dia., Nominal (d):210.0000; OD Chamfer Length (Co):1.800; Outer Diameter (mm):215; Bearing Bore after Mounting (di) - 215 +0.115 / -0:215 +0.115 / 0; ID Chamfer Length (Ci):0.600; Material:Wrapped bronze with; Housing Bore Dia. (Dh) - 215 +0.046 / -0:215 +0.046 / 0; Bearing Length, Nominal (B):60.000; Bearing number:AST090 21060; Bearing Type:straight; Bore Diameter (mm):210; Shaft Size (ds) - 210 -0.170 / -0.216:210 0.170 / 0.216; |
| 34 0641 01 Rollix Slewing Ring Bearings | f2:0,6 mm; L:80 mm; θ:8 mm; D:75 mm; Bearing number:TUP2 70.80; f1:1,2 mm; d:70 mm; Outer Diameter (mm):75; Bore Diameter (mm):70; |
| 161.50.2800.891.41.1503 Standard 5 Slewing Ring Bearings | C:38,1 mm; ra max.:2 mm; Bore Diameter (mm):69,85; Basic static load rating (C0):189 kN; Da max.:80,7 mm; Basic dynamic load rating (C):98,7 kN; Size (mm):69.85x88.9x38.1; D:88,9 mm; Outer Diameter (mm):88,9; Width (mm):38,1; Bearing number:BR 445624; Fw:69,85 mm; Weight:0,51 Kg; |
| 92.50.2266.990.41.1502 Standard 5 Slewing Ring Bearings | Bore Diameter (mm):8; Size (mm):8x22x7; Width (mm):7; Bearing number:MOC 5 Street; Outer Diameter (mm):22; |
| 192.50.4000.990.41.1502 Standard 5 Slewing Ring Bearings | d1:750 mm; Width (mm):375; Basic dynamic load rating (C):13800 kN; D:1280 mm; Bearing number:231/800 KCW33+H31/80; C:375 mm; (Grease) Lubrication Speed:130 r/min; Basic static load rating (C0):29400 kN; d:800 mm; Size (mm):800x1280x375; Weight:1850 Kg; Outer Diameter (mm):1280; B:375 mm; Bore Diameter (mm):800; |
| 191.50.5000.990.41.1502 Standard 5 Slewing Ring Bearings | d:80 mm; C:39 mm; Width (mm):39; Ew:151 mm; (Grease) Lubrication Speed:3500 r/min; B:39 mm; Basic static load rating (C0):207 kN; Bore Diameter (mm):80; Outer Diameter (mm):170; Bearing number:NF316 E; D:170 mm; Weight:4,23 Kg; Size (mm):80x170x39; Basic dynamic load rating (C):194 kN; |
| 36 0641 01 Rollix Slewing Ring Bearings | bore diameter:70 mm; Bearing number:6814; f0:16.1; operating temperature range:-40 to 120 ºC; Min operating temperature, Tmin:-20 °C; Internal Special Features:No; C:10 mm; manufacturer product page:Click here; Weight / LBS:0.301; Da max.:86 mm; snap ring included:Without Snap Ring; UNSPSC:31171504; Snap Ring:No; Manufacturer Item Number:6814; Bore:2.756 Inch | 70 Mill; Enclosure:Open; Characteristic cage frequency, FTF:0.46 Hz; |
| 121.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Size (mm):24x30x12.5; Outer Diameter (mm):30; C:16 mm; Width (mm):12,5; D:30 mm; B:12,5 mm; Bearing number:F-91551; Bore Diameter (mm):24; d:24 mm; |
| 12.40.2950.000.11.1502 Standard 5 Slewing Ring Bearings | Width (mm):92; Calculation factor (Y1):2,76; D:360 mm; Basic dynamic load rating (C):1530 kN; Calculation factor (Y0):2,7; B:92 mm; (Grease) Lubrication Speed:1200 r/min; Calculation factor (e):0,24; r min.:3 mm; Outer Diameter (mm):360; Bearing number:23048E; d:240 mm; (Oil) Lubrication Speed:1500 r/min; C:92 mm; Size (mm):240x360x92; Weight:33,5 Kg; Bore Diameter (mm):240; Basic static load rating (C0):2000 kN; |
| 6 0508 Rollix Slewing Ring Bearings | Outer Diameter (mm):50; B:33 mm; Bearing number:K38x50x33; Width (mm):33; Bore Diameter (mm):38; Fw:38 mm; Ew:50 mm; Size (mm):38x50x33; |
| 22 0641 01 Rollix Slewing Ring Bearings | Outside Diameter:7.087 Inch | 180 Mil; Calculation factor - X:0.35; Harmonized Tariff Code:8482.10.50.28; Reference speed:4000 r/min; cage material:Brass; Calculation factor Y1:0.55; Calculation factor - Y0:0.26; Outer Diameter (mm):100; D1 ≈:150.9 mm; Fatigue load limit Pu:4.4 kN; Cage Material:Brass; Calculation factor Y0:0.52; B:34 mm; ra - max.:2 mm; Manufacturer Name:SKF; Mounting Arrangement:Universal; |
| No. | Brand | m | s | Q | N | O | E | V | Z |
| 28 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 11.35.2620.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.50.3747.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 26 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 27 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 8 0675 | Rollix | - | - | - | - | - | - | - | - |
| 11.30.2031.601.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 6 0823 18 | Rollix | - | - | - | - | - | - | - | - |
| 121.32.4250.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 7 0489 11 | Rollix | - | - | - | 19 mm | - | - | - | - |
| 121.45.5000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 23 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 12.45.2940.000.19.1502 | Standard 5 | - | 0.5 mm | - | - | - | - | - | - |
| 192.50.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.50.2500.891.41.1503 | Standard 5 | 1100 kg / Weight | - | - | - | - | - | - | - |
| 11.40.3150.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 2 0308 01 | Rollix | - | - | - | - | - | - | - | - |
| 12.35.2500.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 1 0422 01 | Rollix | 0,356 kg / Weight | - | - | - | - | - | - | - |
| 24 0541 01 | Rollix | - | - | - | - | - | 35,6 mm | - | - |
| 21 0741 01 | Rollix | 0,516 kg / Weight | - | - | - | - | - | - | - |
91.50.2446.990.41.1502 Standard 5 Slewing Ring Bearings Video
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings | Schaeffler Group USA Inc.
INA slewing rings are known worldwide as premium products in the field of rolling bearing technology. These machine elements have proven themselves many ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...