| 91.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings | d:76,2 mm; C:46,038 mm; Max operating temperature, Tmax:120 °C; Size (mm):76.2x190.5x57.15; T:57,15 mm; Weight:8,69 Kg; Width (mm):57,15; Da:171 mm; B:57,531 mm; da:101 mm; ra max:3.5 mm; Characteristic rolling element frequency, BSF:5.83 Hz; Mass:8.69 kg; Bore Diameter (mm):76,2; d1:141.5 mm; Basic dynamic load rating (C):445 kN; Min operating temperature, Tmin:-40 °C; Nlim (grease):1,900 rpm; Nlim (oil):2,600 rpm; |
| 161.40.2240.890.11.1503 Standard 5 Slewing Ring Bearings | Accessories:Two Shields; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:1700 rpm; Basic Static Radial Load Rating Co:315000 N; Basic Dynamic Radial Load Rating C:255000 N; Sealed Speed Rating n3:1000 rpm; B:56.00 mm; Oil Speed Rating Open/Shielded n2:2000 rpm; d:240.000 mm; D:360.0000 mm; |
| 24 0741 01 Rollix Slewing Ring Bearings | Basic dynamic load rating (C):3,8 kN; Bearing number:KB30-PP-AS; Dn:44,5 mm; Outer Diameter (mm):47; N2:2,5 mm; L:68 mm; L2:51,7 mm; Bore Diameter (mm):30; Fw:30 mm; Weight:0,3 Kg; D:47 mm; BL2:1,85 mm; |
| 161.40.2368.890.11.1503 Standard 5 Slewing Ring Bearings | Bearing number:AST40 3512; Bearing Outside Diameter, Nominal(Do):39.000; Bearing Bore after Mounting (di):35.085 / 34.99; Bearing Length, Nominal (B):12.000; Outer Diameter (mm):39; Shaft Size (ds) - 35 -0.025 / -0.05:35 0.025 / 0.05; OD Chamfer Length (Co):1.200; Bore Diameter (mm):35; Material:Steel shell with PTF; ID Chamfer Length (Ci):0.500; Wall Thickness (S3):2.005; Average Clearance (Cd):0.0750; |
| 162.40.2128.890.11.1503 Standard 5 Slewing Ring Bearings | Designation Ruville:7009; Designation SX:CX094; Designation SNR:R170.09; Bearing number:713615150; Designation SKF:VKBA 949; |
| 191.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | Width (mm):14; Da max.:42 mm; rn:0,5 mm; a:2,46 mm; D_a:42; ra:1; SREX:0.04; SRE:4.63; Z_:7; B:14 mm; DE_:41.731; (Grease) Lubrication Speed:15 000 r/min; hidTable:ecat_NSRDGB; Basic static load rating (C0):6,65 kN; r:1; ra max.:1 mm; B_:14; GRS rpm:15000; da min.:22 mm; C:14 mm; |
| 121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings | Size (mm):10x26x8; Basic dynamic load rating (C):3,75 kN; B:8 mm; ra max.:0,3 mm; C:8 mm; d:10 mm; Weight:0,015 Kg; (Grease) Lubrication Speed:48 000 r/min; Bore Diameter (mm):10; Basic static load rating (C0):1,45 kN; da min.:12,5 mm; r min.:0,3 mm; a:6,5 mm; Da max.:23,5 mm; D:26 mm; r1 min.:0,15 mm; Bearing number:BNT000; (Oil) Lubrication Speed:64 000 r/min; Outer Diameter (mm):26; Width (mm):8; |
| 32 0541 01 Rollix Slewing Ring Bearings | D:62.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:11000 rpm; Grease Speed Rating n1:8800 rpm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:37700 N; d:25.000 mm; Basic Static Radial Load Rating Co:30500 N; B:34.00 mm; |
| 7 0380 01 Rollix Slewing Ring Bearings | Attainable speed for grease lubrication:7500 r/min; Ball - Dw:19.05 mm; Preload class D GD:3360 N; d1:128.5 mm; Reference grease quantity Gref:25.5 cm³; Calculation factor f:1.14; Weight / Kilogram:2.072; Calculation factor fHC:1; Static axial stiffness, preload class C:232 N/µm; Calculation factor - f:1.14; d:110 mm; Number of balls z:20; r3,4 min.:1 mm; D1:151.5 mm; Da max.:161 mm; da min.:119 mm; |
| 161.40.2128.890.11.1503 Standard 5 Slewing Ring Bearings | A1:13 mm; B1:38,1 mm; Thread (G):M6x1; Basic dynamic load rating (C):19,5 kN; D1:40,3 mm; Bore Diameter (mm):30; J:83 mm; d:30 mm; Weight:1,1 Kg; e:18 mm; s:15,9 mm; A:31 mm; L:108 mm; Bearing number:UCF206; N:12 mm; A2:40,2 mm; |
| 36 0741 01 Rollix Slewing Ring Bearings | H:125 mm; Bearing number:UKP319+H2319; H2:250 mm; B1:90 mm; N:36 mm; H1:50 mm; Bolt (G):M30; L:470 mm; N1:50 mm; A:120 mm; Width (mm):125; d:85 mm; Bore Diameter (mm):85; J:360 mm; |
| 32 0741 01 Rollix Slewing Ring Bearings | Fatigue load limit - Pu:143 kN; da min.:233 mm; Fatigue load limit Pu:143 kN; Da - max.:327 mm; Gref:260 cm; Minimum Buy Quantity:N/A; Mass bearing:27.5 kg; Bearing number:NN 3044 K/SPW33; Inch - Metric:Metric; B:90 mm; Da min.:313 mm; Da max.:327 mm; D:340 mm; Limiting speed for grease lubrication:2400 r/min; Retainer:Yes; Number of Rows of Rollers:Double Row; Precision Class:Special Precision; d1:265.2 mm; |
| 62.50.2240.001.49.1504 Standard 5 Slewing Ring Bearings | D:37 mm; Width (mm):9; Outer Diameter (mm):37; B:9 mm; Bore Diameter (mm):20; Bearing number:71904 C; a:8,3 mm; Angle (α):15 °; d:20 mm; C:9 mm; Size (mm):20x37x9; |
| 192.50.5000.990.41.1501 Standard 5 Slewing Ring Bearings | B:80 mm; Size (mm):220x300x80; C:80 mm; Bearing number:NNU4944C1NAP4; Outer Diameter (mm):300; d:220 mm; Bore Diameter (mm):220; Width (mm):80; D:300 mm; |
| 192.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | hidYobi:53406; LangID:1; SRI:7.7; R_:56; Bore Diameter (mm):30; ra:1; D_1:32; R:56 mm; Minimum Buy Quantity:N/A; SDM_:50; Thrust Bearing:Yes; Prod_Type3:TB_SD_WAS; Outer Diameter (mm):70; Cage Material:Steel; r:1; D_:70; SRE:7.7; Inventory:0.0; Z_:10; Long Description:30MM Bore 1; 32MM Bo; |
| 29 0641 01 Rollix Slewing Ring Bearings | Width (mm):57; B:57 mm; Outer Diameter (mm):100,000; Bearing number:UCS309D1; Size (mm):45x100x57; d:45,000 mm; D:100,000 mm; Bore Diameter (mm):45,000; C:29 mm; |
| No. | Brand | m | s | Q | N | O | E | V | Z |
| 11.50.3347.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.40.2199.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.2619.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.25.2800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 28 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 22 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 11.40.2915.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 34 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 192.50.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.30.2031.600.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 8 0405 05 | Rollix | 17,4 kg / Weight | - | - | - | - | - | - | - |
| 121.36.4250.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 191.32.3150.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.30.2330.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 32 0541 01 | Rollix | - | - | - | - | - | - | - | - |
| 162.45.2240.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.50.3520.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.40.2395.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 7 0573 | Rollix | - | - | - | - | - | - | - | - |
| 11.40.3150.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 31 0411 01 | Rollix | - | 21 mm | - | - | - | - | - | - |
| 23 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 191.50.5600.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.40.2368.891.41.1503 Standard 5 Slewing Ring Bearings Video
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings | Schaeffler Group USA Inc.
INA slewing rings are known worldwide as premium products in the field of rolling bearing technology. These machine elements have proven themselves many ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...