11.30.2031.601.41.1503 Standard 5 Slewing Ring Bearings | Width (mm):26.988; B:25.400 mm; (Oil) Lubrication Speed:5500 r/min; Calculation factor (e):0.33; (Grease) Lubrication Speed:4000 r/min; r2 min.:2.4 mm; T:26.988 mm; Basic dynamic load rating (C):77300 kN; r1 min.:3.6 mm; d:42.875 mm; Calculation factor (Y0):0.99; D:82.931 mm; C:22.225 mm; Bore Diameter (mm):42.875; Weight:0,63 Kg; Basic static load rating (C0):100000 kN; Bearing number:H-25577/H-25523; |
191.25.2500.990.41.1502 Standard 5 Slewing Ring Bearings | S:17,5 mm; A4:33,4 mm; J1:74,2 mm; J:105 mm; d:31,75 mm; Bolt (G):M10; Bore Diameter (mm):31,75; N:12 mm; B:42,9 mm; A1:22,5 mm; Weight:1,5 Kg; A2:8 mm; L:127 mm; Basic dynamic load rating (C):25,7 kN; H3:85,725 mm; Bearing number:UCFCX06-20E; Basic static load rating (C0):15,4 kN; A3:9,5 mm; |
26 0541 01 Rollix Slewing Ring Bearings | Width (mm):43; Outer Diameter (mm):190; B:43 mm; C:43 mm; d:90 mm; Size (mm):90x190x43; Bearing number:20318; Bore Diameter (mm):90; D:190 mm; |
121.32.3750.990.41.1502 Standard 5 Slewing Ring Bearings | D:45 mm; Weight:0,133 Kg; Fw:32 mm; Bearing number:RNA 69/28; Size (mm):32x45x30; r min.:0,3 mm; Width (mm):30; Bore Diameter (mm):32; Basic static load rating (C0):64,8 kN; Outer Diameter (mm):45; Basic dynamic load rating (C):41,8 kN; Da max.:43 mm; C:30 mm; |
3 026 Rollix Slewing Ring Bearings | da min.:1 275 mm; T:390 mm; Bearing number:294/950-E1-MB; Reference speed:156 r/min; Bore Diameter (mm):950; Db min.:1 635 mm; d:950 mm; Size (mm):950x1600x390; ra max.:12 mm; db max.:1 020 mm; Width (mm):390; r min.:15 mm; Da max.:1 241 mm; Outer Diameter (mm):1600; d1:1 475 mm; Basic dynamic load rating (C):28 500 kN; T2:153 mm; A:546 mm; D1:1 209 mm; D:1 600 mm; |
61.50.2355.001.49.1504 Standard 5 Slewing Ring Bearings | R:6 mm; Size (mm):900x1280x375; Bearing number:240/900YMD; da:983 mm; Width (mm):375; C:375 mm; Da:1197 mm; B:375 mm; Bore Diameter (mm):900; Outer Diameter (mm):1280; D:1280 mm; d:900 mm; |
162.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings | Bolt (G):M24×75; l4 max.:442 mm; C1 max:80 mm; d6:187 mm; B:70 mm; r min.:1 mm; dk:140 mm; h1:300 mm; l7 min.:115 mm; Bearing number:SIA110ES; Angle:6 °; Bore Diameter (mm):110; d2:264 mm; Weight:44 Kg; Thread (G):M120×4; l3 min.:160 mm; d:110 mm; Basic dynamic load rating (C):654 kN; d4:180 mm; b:75 mm; |
121.45.5300.990.41.1502 Standard 5 Slewing Ring Bearings | A:405 mm; Bolt (G):M36; G:40 mm; Bore Diameter (mm):95; L:94 mm; S:41 mm; B:103 mm; d:95 mm; K:59 mm; D:250 mm; F:41 mm; E:330 mm; Z:121 mm; Bearing number:UCFL319; |
91.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | Basic static load rating (C0):2,36 kN; Bore Diameter (mm):6; U:8 mm; Reference speed:34000 r/min; Ew:9 mm; Weight:0,0008 Kg; Fatigue load limit (Pu):0,25; Basic dynamic load rating (C):2,55 kN; Bearing number:K6x9x8TN; Fw:6 mm; Outer Diameter (mm):9; |
191.50.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Weight:0,414 Kg; ra max.:1 mm; da min.:61 mm; Fatigue load limit (Pu):1 970; Basic static load rating (C0):39 kN; D1:79,2 mm; Size (mm):55x90x18; D:90 mm; Bore Diameter (mm):55; C:18 mm; d1:67,3 mm; Da max.:84 mm; B:18 mm; d:55 mm; r min.:1,1 mm; Outer Diameter (mm):90; Width (mm):18; Bearing number:BXRE011-2HRS; Basic dynamic load rating (C):42 kN; |
162.45.2366.891.41.1503 Standard 5 Slewing Ring Bearings | Designation SX:CX017; Designation FAG:713614210; Designation SNR:R178.03; Bearing number:7803; Designation SKF:VKBA 1430; |
37 0741 01 Rollix Slewing Ring Bearings | d3:58 mm; Basic dynamic load rating - C:30.7 kN; Recommended lock nut tightening angle α:105 °; Calculation factor - f0:14; D:80 mm; B1:46 mm; Basic dynamic load rating C:30.7 kN; Fatigue load limit Pu:0.8 kN; Fatigue load limit - Pu:0.8 kN; Outer Diameter (mm):31,75; Associated spanner:HN 8-9; d2:51.8 mm; Bore Diameter (mm):80; Mass bearing + adapter sleeve:0.77 kg; Limiting speed1):4800 r/min; |
121.36.4000.990.41.1502 Standard 5 Slewing Ring Bearings | (Grease) Lubrication Speed:19 000 r/min; ra(max):1; Outer Diameter (mm):62; Angle (α):15 °; Bearing No.:7305C; Da max.:55 mm; Size (mm):25x62x17; Cu:1.30; Weight:0.243 Kg; B:17 mm; r min.:1.1 mm; (Refer.)Mass(kg):0.243; a(mm):14.3; da min.:32 mm; Bore Diameter (mm):25; ra max.:1 mm; Grease lub.:15000; Oil lub.:20000; r(min):1.1; da(min):32; |
12.45.3400.101.49.1502 Standard 5 Slewing Ring Bearings | Width (mm):36; Static Load Rating (Cor):325,000; Bore Dia (d):85.0000; Width (B):36.0000; Dynamic Load Rating (Cr):250,000; Weight (g):2,510.00; Bore Diameter (mm):85; Max Speed (Grease) (X1000 RPM):2; Bearing number:22217CW7; Material:52100 Chrome steel,; Radius (min) (rs):2.000; Size (mm):85x150x36; Max Speed (Oil) (X1000 RPM):3; Outer Diameter (mm):150; Outer Dia (D):150.0000; Bearing Type:straight bore; |
191.20.2000.990.41.1502 Standard 5 Slewing Ring Bearings | Bearing number:3320-2RS; a:110,7 mm; Width (mm):82,6; B1:82,6 mm; Outer Diameter (mm):215; Bore Diameter (mm):100; D:215 mm; Size (mm):100x215x82.6; d:100 mm; C:82,6 mm; |
21 0541 01 Rollix Slewing Ring Bearings | D:35 mm; Bore Diameter (mm):15; Basic static load rating (C0):4,7 kN; Width (mm):11; Outer Diameter (mm):35; a:16 mm; d:15 mm; Bearing number:7202 B; Basic dynamic load rating (C):8,66 kN; B:11 mm; Weight:0,045 Kg; (Grease) Lubrication Speed:18360 r/min; C:11 mm; Size (mm):15x35x11; |
No. | Brand | m | s | Q | N | O | E | V | Z |
162.40.2128.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
1 0342 | Rollix | - | - | - | - | - | - | - | - |
8 0270 04 | Rollix | - | - | - | - | - | - | - | - |
192.50.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
6 04 | Rollix | - | - | - | - | - | - | - | - |
192.50.3150.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
1 0289 06 | Rollix | - | - | - | - | - | - | - | - |
161.45.2366.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
6 0508 | Rollix | - | - | - | - | - | - | - | - |
121.50.6700.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
6 0734 | Rollix | - | - | - | - | - | - | - | - |
191.40.3550.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
162.40.2368.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
28 0741 01 | Rollix | - | - | - | - | - | - | - | - |
26 0541 01 | Rollix | - | - | - | - | - | - | - | - |
24 0741 01 | Rollix | - | - | - | - | - | - | - | - |
12.50.3739.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
1 0181 02 | Rollix | - | - | - | - | - | - | - | - |
37 0641 01 | Rollix | - | - | - | - | - | - | - | - |
121.36.4750.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
12.40.2199.301.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
31 0411 01 | Rollix | - | 21 mm | - | - | - | - | - | - |
11.40.3150.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.50.2800.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
192.32.2500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.40.2368.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
27 0411 01 | Rollix | - | - | - | - | - | - | - | - |
39 0541 01 | Rollix | - | - | - | - | - | - | - | - |
12.30.2538.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
91.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings Video
Slewing Rings | Schaeffler Group USA Inc.
INA slewing rings are known worldwide as premium products in the field of rolling bearing technology. These machine elements have proven themselves many ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...