| 29 0741 01 Rollix Slewing Ring Bearings | Fillet Radius/Chamfer:1.1 mm; Bore Type:Cylindrical Bore; Radial Clearance:0.013 to 0.028 mm; d:20 mm; Limiting Speed - Grease:14,000 rpm; Dynamic Load Rating:15,900 N; Configuration:Single Row; Static Load Rating:7,900 N; Enclosure:Double Shield; Weight:0.144 kg; da (min):27 mm; D:52 mm; Factor fo:12.4; ra (max):1.1 mm; Da (max):45 mm; B:15 mm; |
| 1 0555 01 Rollix Slewing Ring Bearings | Bore Diameter (mm):66,675; C:30,162 mm; B:36,678 mm; d:66,675 mm; Size (mm):66.675x129.944x38.1; D:129,944 mm; r:3,3 mm; R:3,5 mm; Width (mm):38,1; Bearing number:560/553-SA; Outer Diameter (mm):129,944; T:38,1 mm; |
| 11.30.2235.000.11.1503 Standard 5 Slewing Ring Bearings | Width (mm):55; Basic static load rating (C0):185 kN; Bore Diameter (mm):120; C:55 mm; Size (mm):120x260x55; Bearing number:6324 ZZ; B:55 mm; Basic dynamic load rating (C):207 kN; Outer Diameter (mm):260; Weight:14,6 Kg; D:260 mm; (Grease) Lubrication Speed:2600 r/min; d:120 mm; |
| 12.50.3739.001.49.1502 Standard 5 Slewing Ring Bearings | Bearing number:FR 155 ZZS; Outer Diameter (mm):9,119; D1:9,119 mm; Basic static load rating (C0):0,149 kN; Width (mm):3,175; Weight:0,67 Kg; d:3,967 mm; db min:5,5 mm; C:3,175 mm; B:3,175 mm; r min.:0,1 mm; C1:0,91 mm; Bore Diameter (mm):3,967; Basic dynamic load rating (C):0,36 kN; Size (mm):3.967x9.119x3.175; D:7,938 mm; ra max.:0,1 mm; |
| 11.50.3347.001.49.1502 Standard 5 Slewing Ring Bearings | Relubrication Hole Location (oh):7.5000; Snap Rinf Location (Sd):3.2000; Snap Ring Thickness (I):2.4000; Bore Dia (d):49.2100; Outer Dia (D):90.0000; Static Load Rating (Cor):23,232; Bearing Type:Inch Size Bore Diame; Shaft Size (ds) - 1-15/16:115/16; Bore Diameter (mm):49,21; Inner Width (Bi):51.6000; Bearing Inner Race Width - Extended Side (m):32.6000; Dynamic Load Rating (Cr):35,095; Snap Ring Dia. (G):96.3000; |
| 191.32.2800.990.41.1502 Standard 5 Slewing Ring Bearings | Basic static load rating (C0):14,15 kN; Fw:18 mm; Outer Diameter (mm):24; Basic dynamic load rating (C):12,15 kN; Weight:0,0116 Kg; Bearing number:K 18x24x12; Ew:24 mm; Bc:12 mm; Bore Diameter (mm):18; |
| 31 0411 01 Rollix Slewing Ring Bearings | Basic static load rating C0:96.5 kN; Outer Diameter (mm):30; rb - max.:0.3 mm; rb max.:0.3 mm; s:21 mm; Da - max.:52 mm; Mass bearing (including seat washer where applicable):0.85 kg; Basic dynamic load rating - C:49.4 kN; ra max.:1 mm; Size (mm):68x30x47.2; H1:52 mm; D1:37 mm; D2:52 mm; D1 ≈:37 mm; R:56 mm; Limiting speed:3400 r/min; d:30 mm; H:47.2 mm; Minimum load factor - A:0.048; Reference speed:2400 r/min; |
| 11.40.2240.000.11.1502 Standard 5 Slewing Ring Bearings | C:18 mm; U:82,4 mm; Bore Diameter (mm):65; Thread (G):R1/8“; A:188 mm; M:150 mm; P:38 mm; d:65 mm; K:18 mm; V:165 mm; L:74,6 mm; T:52 mm; Bearing number:RCJY65; |
| 11.40.2240.001.41.1502 Standard 5 Slewing Ring Bearings | B:25,4 mm; Width (mm):23,812; Outer Diameter (mm):79,375; D:79,375 mm; Size (mm):39.688x79.375x23.812; T:23,812 mm; C:19,05 mm; r:2,3 mm; d:39,688 mm; Bearing number:26880/26822A; Bore Diameter (mm):39,688; R:1,5 mm; |
| 162.45.2366.890.11.1503 Standard 5 Slewing Ring Bearings | W:46 mm; Basic dynamic load rating (C):110 kN; d4:50 mm; B:22 mm; l5:15 mm; Angle:6 °; h1:110 mm; Bearing number:SI30ET-2RS; dk:40,7 mm; r min.:0,6 mm; d3:42 mm; Bore Diameter (mm):30; Weight:0,98 Kg; l4 max.:146,5 mm; G:M30×2 mm; d:30 mm; l3 min.:56 mm; C1 max:20 mm; l7 min.:37,5 mm; d2:73 mm; |
| 92.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings | Dynamic Load Rating:49,500 N; Bore Type:Cylindrical Bore; Factor fo:15.7; Static Load Rating:43,000 N; Da (max):124 mm; Weight:0.895 kg; Radial Clearance:0.030 to 0.058 mm; d:85 mm; Limiting Speed - Oil:6,000 rpm; B:22 mm; ra (max):1.1 mm; da (min):91 mm; Enclosure:Open; Limiting Speed - Grease:5,000 rpm; Fillet Radius/Chamfer:1.1 mm; D:130 mm; Configuration:Single Row; |
| 35 0411 01 Rollix Slewing Ring Bearings | F:25,4 mm; H1:137 mm; R:32 mm; Q:70 mm; K:26 mm; A:167 mm; Bore Diameter (mm):60; L:48 mm; H2:121 mm; P:111 mm; S:41 mm; B:65,1 mm; Bearing number:UCTX12; H:224 mm; J:70 mm; d:60 mm; E:151 mm; G:23 mm; |
| 191.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Calculation factor (e):0,34; Calculation factor (Y1):2; Size (mm):220x460x145; C:145 mm; Outer Diameter (mm):460; Width (mm):145; Basic dynamic load rating (C):3350 kN; D:460 mm; Bore Diameter (mm):220; (Oil) Lubrication Speed:1300 r/min; Calculation factor (Y0):1,95; Bearing number:22344E; Basic static load rating (C0):3600 kN; d:220 mm; Weight:119 Kg; r min.:5 mm; (Grease) Lubrication Speed:1000 r/min; |
| 12.35.2690.001.41.1503 Standard 5 Slewing Ring Bearings | d:420,000 mm; Bearing number:RNNU8413; B:280,000 mm; Size (mm):420x760x280; Outer Diameter (mm):760,000; Width (mm):280,000; C:280,000 mm; D:760,000 mm; Bore Diameter (mm):420,000; |
| 38 0541 01 Rollix Slewing Ring Bearings | (Grease) Lubrication Speed:2600 r/min; Weight:8,56 Kg; Size (mm):120x215x58; Bore Diameter (mm):120; Outer Diameter (mm):215; Basic dynamic load rating (C):452 kN; B:58 mm; Ew:195,5 mm; Basic static load rating (C0):619 kN; Bearing number:N2224 E; d:120 mm; C:58 mm; Width (mm):58; D:215 mm; |
| 121.45.5300.990.41.1502 Standard 5 Slewing Ring Bearings | A:405 mm; Bolt (G):M36; G:40 mm; Bore Diameter (mm):95; L:94 mm; S:41 mm; B:103 mm; d:95 mm; K:59 mm; D:250 mm; F:41 mm; E:330 mm; Z:121 mm; Bearing number:UCFL319; |
| No. | Brand | m | s | Q | N | O | E | V | Z |
| 11.35.2220.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3 0402 | Rollix | - | - | - | - | - | - | - | - |
| 192.50.6300.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.30.2235.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 24 0541 01 | Rollix | - | - | - | - | - | 35,6 mm | - | - |
| 28 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 11.50.3747.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.50.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 33 0411 01 | Rollix | - | - | - | - | - | - | - | - |
| 1 0422 01 | Rollix | 0,356 kg / Weight | - | - | - | - | - | - | - |
| 33 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 162.45.2240.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 6 0307 | Rollix | - | - | - | - | - | - | - | - |
| 191.50.5000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 27 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 31 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 161.45.2654.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.50.2800.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.40.2368.891.41.1503 | Standard 5 | - | - | - | 41 mm | - | - | - | - |
| 121.40.5300.990.41.1502 | Standard 5 | - | - | - | - | - | 248 mm | - | - |
192.32.2240.990.41.1502 Standard 5 Slewing Ring Bearings Video
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings | Schaeffler Group USA Inc.
INA slewing rings are known worldwide as premium products in the field of rolling bearing technology. These machine elements have proven themselves many ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...