| 230.20.0700.503 Type 21/850. Standard 5 Slewing Ring Bearings | housing material:Cast Iron; flange mounting type:Four-Bolt Square; bore type:Round; D:2.8750 in; duty type:Air Handling; series:RFB; bearing type:Tapered Roller; replacement bearing:RCI-104; finish/coating:Uncoated; expansion type:Non-Expansion Bearin; overall height:4 in; operating temperature range:-20 to +220 &de; radial dynamic load capacity:2975 lb; overall depth:2-13/16 in; housing construction:Solid Flange Mount; |
| 3R8-122N1A Rotek Slewing Ring Bearings | Availability:In Stock; Preload:Medium; B:10mm; Oil Limiting Speed (r/min):70000; SKU:7003acdgb/p4a-skf; D:35mm; Weight:0.04 KGS; Dynamic Load Rating (kN):6.5; Grease Limiting Speed (r/min):45000; Seals or Shields:Open Type; Static Load Rating (kN):3.1; d:17mm; Clearance:Standard; Fatigue Load Rating (kN):0.132; Cage Type:Plastic; |
| 162.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | compatible inner ring:IR-612-1; B:3/4 in; static load capacity:7250 lbf; D:7/8 in; d:5/8 in; lubrication hole type:No Hole; maximum rpm:6500 RPM; series:BH; drawn cup type:Open Ends with Full; dynamic load capacity:4450 lbf; precision rating:Not Rated; standards met:ANSI/ABMA 18.2,; operating temperature range:Maximum of +250; closure type:Open; cage material:No Cage; |
| 60.22.0505.000.11.1503 Standard 5 Slewing Ring Bearings | bearing material:440 Stainless Steel; series:FB260STW; seal type:Contact; application:General Industrial; cage material:Nylon; insert material:440 Stainless Steel; bearing style:Flange Block; locking device:Set Screw; insert bearing type:Setscrew Lock - Wide; bearing type:2-Hole; mounting type:Two-Bolt Flange; bore type:Round; expansion type:Non-Expansion Bearin; flange mounting type:2-Hole Flange Block; |
| 3R6-71E9 Rotek Slewing Ring Bearings | radial static load capacity:12200 lb; fillet radius:2 mm; D:120 mm; B:29 mm; internal clearance:C0; precision rating:ABEC 7 (ISO Cla; standards met:ABMA; outer ring width:29 mm; series:2MM300WI; ball screw application:Not for Ball Screws; radial dynamic load capacity:20800 lb; closure type:Open; cage material:Phenolic Resin; finish/coating:Uncoated; d:55 mm; maximum rpm:12400 RPM; contact angle:15 °; |
| 162.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | cage material:Steel; D:100 mm; B:11 mm; bore type:Round; d:65 mm; dynamic load capacity:22500 N; outer ring width:11 mm; series:160; precision rating:ABEC 1 (ISO Cla; operating temperature range:Maximum of +120; standards met:DIN 625-1; maximum rpm:9900 RPM; finish/coating:Uncoated; static load capacity:19700 N; fillet radius:0.6 mm; closure type:Open; internal clearance:C0; row type & fill slot:Single Row Non-Fill; |
| 230.20.0400.503 Type 21/520. Standard 5 Slewing Ring Bearings | d:240 mm; B:92 mm; manufacturer upc number:087796315662; cage material:Brass Cage; internal clearance:C0; D:360 mm; bore type:Tapered 1:12; |
| 61.25.0855.575.11.1403 Standard 5 Slewing Ring Bearings | sleeve bearing type:Plain Sleeve; d:7/8 in; D:1 in; manufacturer catalog:Click here; bearing material:Powdered Metal SAE 8; groove/plug type:None; material specification:SAE 841 Bronze; standards met:ASTM B438 Grade 1 Ty; maximum pv value:50000; overall length:1-1/4 in; maximum v value:1200; maximum p value:2000; manufacturer upc number:717905076015; operating temperature range:10 to 220 ºF; |
| 61.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | cage material:Steel; B:39 mm; precision rating:ABEC 1; bore type:Round; snap ring included:Without Snap Ring; internal clearance:C3; d:80 mm; inner ring width:39 mm; closure type:Single Shield; outer ring width:39 mm; D:170 mm; manufacturer upc number:053893725437; |
| 232.21.0575.013 Type 21/650.2 Standard 5 Slewing Ring Bearings | thread size:PF3/4; series:UEECH200; thread length:3/4 in; hanger unit type:Conveyor Hanger Unit; locking device:Accu-Loc Collar; housing material:Cast Iron; radial static load capacity:4020 lbf; replacement bearing:UE208-24; d:1.5000 in; bearing material:AISI 52100 Steel; radial dynamic load capacity:6590 lbf; D:3.7500 in; seal type:Contact with Slinger; |
| R9-55E3 Rotek Slewing Ring Bearings | H:150 mm; B:45 mm; Limiting speed:240 r/min; r1,2 min.:5 mm; Basic dynamic load rating C:5300 kN; Reference speed:120 r/min; da min.:1215 mm; Mass bearing:225 kg; d1:1244 mm; D1:1066 mm; Minimum axial load factor A:110; ra max.:4 mm; Da max.:1095 mm; D:1250 mm; d:1060 mm; Basic static load rating C0:36500 kN; Fatigue load limit Pu:1930 kN; |
| 62.20.0450.001.21.1503 Standard 5 Slewing Ring Bearings | operating temperature range:-400 to +550 &d; groove/plug type:None; maximum v value:400 fp/min; bearing material:Fiberglass Reinforce; overall length:1/2 in; material specification:BOSTonE F-1; maximum p value:1000 psi; d:3/4 in; maximum pv value:50000; sleeve bearing type:Plain Sleeve; D:1 in; |
| 62.25.0855.575.11.1403 Standard 5 Slewing Ring Bearings | Weight:39.7 lbs; static load capacity:1340 kN; d:190 mm; series:230; D:290 mm; B:75 mm; bore type:Straight; manufacturer upc number:7316576601682; internal clearance:C3; dynamic load capacity:916 kN; lubrication hole type:Oil Groove and Holes; closure type:Open; outer ring type:Not Split; maximum rpm:2400 rpm; cage material:Stamped Steel; |
| 232.20.0400.013 Type 21/520.2 Standard 5 Slewing Ring Bearings | D:130mm; Dynamic Load Rating (kN):66; SKU:6215znr-nsk; d:75mm; Seals or Shields:Single Metal Shield; Clearance:Standard; B:25mm; Weight:1.19 KGS; Oil Limiting Speed (r/min):5600; Static Load Rating (kN):49.5; Cage Type:Steel; Grease Limiting Speed (r/min):4800; Availability:In Stock; |
| A18-80N1 Rotek Slewing Ring Bearings | d:190mm; B:100mm; Clearance:C4; SKU:24038cc/c4w33-qbl; Weight:0.02 KGS; Cage Type:Steel; D:290mm; Availability:In Stock; Seals or Shields:Open Type; |
| 3R8-88N9 Rotek Slewing Ring Bearings | w:30 mm; Basic dynamic load rating C:48 kN; B:20 mm; l5 ≈:18 mm; h1:94 mm; C1 max.:18 mm; l7 min.:30 mm; Basic static load rating C0:90 kN; Mass rod end:0.65 kg; α:7 °; d4 ≈:35 mm; l4 max.:128 mm; dk:35.5 mm; l3 min.:36 mm; d2 max.:65 mm; Specific dynamic load factor K:100 N/mm²; G:M 24x2; Material constant KM:330; r1 min.:0.6 mm; d:25 mm; |
| No. | Brand | D | T | U | w | s | G | H | b |
| 250.15.0300.013 Type 13/4 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0600.503 Type 21/750.2 | Standard 5 | 4.9688 in | - | - | - | - | - | - | - |
| 230.21.0775.013 Type 21/850. | Standard 5 | 5.7500 in | - | - | - | - | - | - | - |
| 60.20.0644.575.01.1403 | Standard 5 | 163.51 mm | - | - | - | - | - | - | - |
| 3R13-128N1A | Rotek | - | - | - | - | - | - | - | - |
| 3R6-71P9 | Rotek | 3.5000 in | - | - | - | - | - | - | - |
| 161.20.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0544.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.16.0450.891.21.1503 | Standard 5 | 9.8430 in | - | - | - | - | - | - | - |
| 62.25.0886.801.21.1504 | Standard 5 | 1.0000 in | - | - | - | - | - | - | - |
| 161.16.0630.891.21.1503 | Standard 5 | 2-1/4 in | - | - | - | - | - | - | - |
| 232.20.0800.013 Type 21/950.2 | Standard 5 | 86 mm to 105 mm | - | - | - | - | - | - | - |
| 61.25.0855.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| S24-158E1 | Rotek | - | - | - | - | - | - | - | - |
| A10-110P2D | Rotek | 16 mm | - | - | - | - | - | - | - |
| 60.20.0744.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| L9-57P9Z | Rotek | 120mm | - | - | - | - | - | - | - |
| 250.15.0475.013 Type 13/5 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.22.0370.301.11.1504 | Standard 5 | 4.0000 in | - | - | - | - | - | - | - |
| 3R6-79P9 | Rotek | 27.0000 in | - | - | - | - | - | - | - |
| L9-53N9Z | Rotek | 4-23/32 in | - | - | - | - | - | - | - |
| 62.20.0414.500.01.1503 | Standard 5 | 7.8500 in | - | - | - | - | - | - | - |
| A18-89E1 | Rotek | 15.5000 in | - | - | - | - | - | - | - |
| 161.16.0400.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A9-54N2 | Rotek | - | - | - | - | 25.4 mm | - | 100.013 mm | - |
| S20-125E1 | Rotek | - | - | - | - | - | - | - | - |
| 3R10-98N1B | Rotek | - | - | - | - | - | - | - | - |
| 231.20.0800.503 Type 21/950.1 | Standard 5 | 2.7500 in | - | - | - | - | - | - | - |
| 3R6-63P9 | Rotek | - | - | - | - | - | - | - | - |
| 230.21.0975.013 Type 21/1050. | Standard 5 | - | - | - | - | - | - | - | - |
3R16-102P5 Rotek Slewing Ring Bearings Video
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
iglide® PRT rotary joint & slewing ring bearing from igus®
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Their built-in mounting holes on the inner and outer rings allow for simple installation. Slewing rings are large-sized bearings that ...