| S16-100E1 Rotek Slewing Ring Bearings | Calculation factor Y1:3; D1 ≈:1029 mm; b:22.3 mm; r1,2 min.:6 mm; Fatigue load limit Pu:1370 kN; Mass bearing:740 kg; K:12 mm; d2 ≈:940 mm; Basic dynamic load rating C:9390 kN; Reference speed:220 r/min; Limiting speed:400 r/min; ra max.:5 mm; Basic static load rating C0:22800 kN; Calculation factor Y0:2.8; da min.:873 mm; Da max.:1097 mm; Calculation factor Y2:4.6; D:1120 mm; d:850 mm; |
| 62.20.0710.001.21.1503 Standard 5 Slewing Ring Bearings | maximum rpm:2400 RPM; lubrication type:Lubrication Fitting; D:6.94 to 7.31 in; bore type:Round; overall height:5.5900 in; locking device:Adapter Mount; d:2.4375 in; overall length:9.2500 in; B:3.42 in; manufacturer catalog number:069539; replacement bearing:22213; radial dynamic load capacity:39000 lb; standards met:UL, AFBMA, AGMA, ASM; base width:3.28 in; base to bore centerline:2.7500 in; seal type:Triple Lip; |
| 61.25.0764.601.21.1503 Standard 5 Slewing Ring Bearings | static load capacity:41500 N; internal clearance:C0; row type & fill slot:Single Row Non-Fill; operating temperature range:-30 to +120 &de; dynamic load capacity:63000 N; standards met:DIN 625-1; bore type:Round; B:23 mm; fillet radius:1.5 mm; cage material:Steel; d:65 mm; series:62; D:120 mm; finish/coating:Uncoated; outer ring width:23 mm; precision rating:Not Rated; closure type:Single Shield; |
| 231.20.0700.013 Type 21/850.1 Standard 5 Slewing Ring Bearings | d:0.4375 in; ball material:52100 Bearing Steel; thread direction:Right Hand; manufacturer catalog number:HMR7-8T; head width:0.437 in; rod end type:Male Threaded; misalignment angle:12 °; lubrication type:Maintenance Free ball width:0.562 in; head diameter:1.312 in; lubrication:Self Lubricating; series:HM-T; grade:Precision; standards met:SAEJ1120; shank thread length:1.500 in; race material:Steel; |
| 61.20.0560.100.11.1503 Standard 5 Slewing Ring Bearings | bore type:Round; mounting type:Three-Bolt Bracket S; D:1.8750 in; length through bore:1-35/64 in; radial static load capacity:2520 lbf; d:1.1875 in; finish/coating:Uncoated; lubrication type:Cannot Be Relubricat; B:3.2500 in; housing material:Thermoplastic; expansion type:Non-Expansion Bearin; radial dynamic load capacity:4380 lbf; series:Marathon®; |
| S8-56E1 Rotek Slewing Ring Bearings | d:45mm; Dynamic Load Rating (kN):32.7; Static Load Rating (kN):20.3; D:85mm; Weight:0.02 KGS; Limiting Speed Rating (r/min):7700; Availability:In Stock; SKU:6209-zz-koyo; B:19mm; Fatigue Load Rating (kN):--; Reference Speed Rating (r/min):--; Clearance:Standard; Cage Type:Steel; Seals or Shields:Two Metal Shields; |
| 3R16-265E1 Rotek Slewing Ring Bearings | d:2.9375 in; B:6.6875 in; rod hole diameter:1.6250 in; bearing type:Spherical Roller; seal type:Labyrinth Seal; locking device:Adapter Mounted; overall length:8.9375 in; manufacturer upc number:793699501896; unit type:Side Mount; slot width:1.8125 in; Weight:13 lbs; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; slot spacing:5.9370 in; housing material:Cast Iron; |
| 61.20.0844.500.01.1503 Standard 5 Slewing Ring Bearings | standards met:ABMA; maximum rpm:4000 RPM; precision rating:ABEC 1 (ISO Cla; finish/coating:Uncoated; cage material:Steel; D:160 mm; d:90 mm; fillet radius:2 mm; internal clearance:C0; B:30 mm; dynamic load capacity:22700 lbf; closure type:Single Shield; thrust application warning:This product can not; static load capacity:24300 lbf; bore type:Round; row type & fill slot:Single Row Filling S; series:200-M; |
| 62.25.0955.575.11.1403 Standard 5 Slewing Ring Bearings | overall length:4-29/64 in; rod hole diameter:55/64 in; series:UKT200+HE2000; seal type:Contact with Slinger; overall height:4-1/64 in; d:1.0000 in; locking device:Adapter Sleeve; lubrication type:Lubrication Fitting; slot width:0.4688 in; housing material:Cast Iron; unit type:Side Mount; dynamic load capacity:4410 lbf; slot spacing:2.2500 in; |
| 3R6-79N9 Rotek Slewing Ring Bearings | Da:269.999 mm; P180°:162 kN; Mass pillow block:117 kg; Ca:82.804 mm; Initial grease fill:623.7 g; Pa:32.7 kN; PG:1/4 NPT; Cap bolt, SAE grade:8; R2:39.688 mm; Eye bolt:2 x 3/8-16 UNC; A2:215.9 mm; A1:158.75 mm; S:4.763 mm; h:50.8 mm; Cap bolt recommended tightening torque:813.5 N·m; Housing:SSAFS 530; End plug (suffix Y):EPR 16; Stabilizing ring:SR-30-0; P90°:236 kN; P60°:394 kN; |
| 3R8-98N1 Rotek Slewing Ring Bearings | Category:Sleeve Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0; Product Group:B04264; Profile:Bushing No Flange; Material Description:Oil Impregnated Sintered Bronze; Material:SAE841; Inch - Metric:Inch; Long Description:5/32" Nominal Bore; 1/4" Nominal Outside Diameter; 3/8" Length Thru Bore; Bushing No Flange Profile; Oil Impregnated Sintered Bronze; SAE841 Material; 5/32" Bore; |
| 62.25.0886.109.21.1504 Standard 5 Slewing Ring Bearings | manufacturer upc number:605790211942; closure type:Open; drawn cup type:Open Ends with Full; D:0.2813 in; d:0.1563 in; B:0.2500 in; |
| 62.25.0886.106.11.1504 Standard 5 Slewing Ring Bearings | B:36.5mm; SKU:3212atn9-qbl; d:60mm; Weight:0.02 KGS; Cage Type:Plastic; Availability:In Stock; Clearance:Standard; Seals or Shields:Open Type; D:110mm; |
| 3R8-98P9 Rotek Slewing Ring Bearings | bore type:Round; static load capacity:7200 lbs; dynamic load capacity:12500 lbs; row type & fill slot:Single Row Non-Fill; D:100 mm; internal clearance:C0; manufacturer catalog:Click here; manufacturer upc number:029176017001; maximum rpm (oil):9500 rpm; closure type:Two Non-Contact Seal; snap ring included:Without Snap Ring; maximum rpm (grease):8000 rpm; B:25 mm; d:45 mm; bearing material:Steel; |
| A16-86P1 Rotek Slewing Ring Bearings | lubrication:Unlubricated; ball width:25 mm; series:MC; head width:16.25 mm; housing material:Carbon Steel - corro; length to ball center:78 mm; d:20 mm; lubrication type:With Lubrication Fit; misalignment angle:20 °; rod end type:Male Threaded; grade:Commercial/Indu; thread direction:Left Hand; ball material:52100 BEARING STEEL; head diameter:46 mm; shank thread size:M20 x 1.5; shank thread length:47 mm; |
| 230.20.0800.503 Type 21/950. Standard 5 Slewing Ring Bearings | tang thickness:0.116 in; key width:0.435 in; tang width:0.52 in; series:W-00; compatible lock nut number:AN-26, N-26; material:Steel; number of tangs:19; outside diameter over tangs:7.031 in; face diameter:6.188 in; d:5.191 in; |
| No. | Brand | D | T | U | w | s | G | H | b |
| A16-78E4 | Rotek | - | - | - | - | - | - | - | - |
| W16-84P1 | Rotek | 47mm | - | - | - | - | - | - | - |
| R9-67N3 | Rotek | 5.6250 in | - | - | - | - | - | - | - |
| 282.30.0975.013 Type 110/1100.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.0764.601.21.1503 | Standard 5 | 120 mm | - | - | - | - | - | - | - |
| A22-166N1 | Rotek | - | - | - | - | 31.75 mm | - | - | - |
| 3R6-71P9 | Rotek | 3.5000 in | - | - | - | - | - | - | - |
| 3R10-117N3D | Rotek | 440mm | - | - | - | - | - | - | - |
| A18-80E1 | Rotek | 1-1/2 in | - | - | - | - | - | - | - |
| 232.20.0800.013 Type 21/950.2 | Standard 5 | 86 mm to 105 mm | - | - | - | - | - | - | - |
| 3R10-88N2B | Rotek | 32 mm | - | - | - | - | - | - | - |
| W14-60P1 | Rotek | 7.0000 in | - | - | - | - | - | - | - |
| 60.22.0505.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.0886.890.11.1503 | Standard 5 | 3.6200 in | - | - | - | - | - | - | - |
| 61.20.0710.100.11.1503 | Standard 5 | 32 mm | - | - | - | - | - | - | - |
| S16-100E1 | Rotek | 1120 mm | - | - | - | - | - | - | 22.3 mm |
| 62.25.0955.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0414.500.01.1503 | Standard 5 | 7.8500 in | - | - | - | - | - | - | - |
| 62.20.0630.001.21.1503 | Standard 5 | 2.8438 in | - | - | - | - | - | - | - |
| 62.25.0886.800.11.1504 | Standard 5 | 23 mm | - | - | - | - | - | - | - |
| 162.16.0630.891.21.1503 | Standard 5 | 170mm | - | - | - | - | - | - | - |
| 3R8-98P9 | Rotek | 100 mm | - | - | - | - | - | - | - |
| S14-80E1 | Rotek | 2.75 Inch | 69.85 Millimeter | - | - | - | - | - | - | - |
| 232.20.0700.503 Type 21/850.2 | Standard 5 | 6.1450 in | - | - | - | - | - | - | - |
| 3R6-63N9 | Rotek | 2.7500 in | - | - | - | - | - | - | - |
| 250.14.0300.013 Type 13/4 | Standard 5 | - | - | - | - | - | - | - | - |
| A18-80N1 | Rotek | 290mm | - | - | - | - | - | - | - |
| 61.20.0644.500.01.1503 | Standard 5 | 170 mm | - | - | - | - | - | - | - |
| 232.21.0675.013 Type 21/750.2 | Standard 5 | 2-1/4 in | - | - | - | - | - | - | - |
| 3R6-63P9 | Rotek | - | - | - | - | - | - | - | - |
A16-59N2 Rotek Slewing Ring Bearings Video
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
iglide® PRT rotary joint & slewing ring bearing from igus®
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Their built-in mounting holes on the inner and outer rings allow for simple installation. Slewing rings are large-sized bearings that ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...